Candidate materials
Double-sided tape
VHB acrylic foam tape
Stretch-release pull tape
High-temperature tape
HOME/EXPLORE
Bonding / Adhesive
Consider surfaces, loads, temperature and assembly method together.
START WITH THE FAILURE MODE
Why is the bond lifting, shifting or leaving residue?
Consider surfaces, loads, temperature and assembly method together.
01Symptom02Cause03Material & process04Verification
Choose the symptom closest to your project below. We then connect it to a cause, a manufacturable route and a verification method.
01 / PROBLEM DIAGNOSIS
What you see is only the symptom.
Open each route to see how the problem becomes a manufacturable, verifiable part.
01WHAT THE CUSTOMER SEESEdge lift or bond failure after assembly
+
Edge lift or bond failure after assembly
LIKELY CAUSE
Surface energy, contamination, load, temperature or dwell time does not match the adhesive.
WANXIN ENGINEERING ROUTE
Compare adhesive systems and convert the selected tape with stress-relief geometry.
HOW TO VERIFY
Send this problem to engineeringPeel / holding trial, surface preparation and environmental validation.
02WHAT THE CUSTOMER SEESOperator cannot place the thin adhesive accurately
+
Operator cannot place the thin adhesive accurately
LIKELY CAUSE
The part lacks a usable tab, datum or stable carrier.
WANXIN ENGINEERING ROUTE
Design easy-peel liners, positioning features and roll or sheet presentation.
HOW TO VERIFY
Send this problem to engineeringAssembly trial, liner sequence and critical position check.
03WHAT THE CUSTOMER SEESBattery or display pull tape tears, slips or leaves residue during removal
+
Battery or display pull tape tears, slips or leaves residue during removal
LIKELY CAUSE
Pull direction, bonded length, handle geometry, substrate or storage condition does not match the removal motion.
WANXIN ENGINEERING ROUTE
Review the removal path and convert stretch-release tape with a protected handle, clear pull direction and controlled bonded area.
HOW TO VERIFY
Send this problem to engineeringBonding trial, pull-direction test, removal speed and residue check on the actual substrates.
02 / BUILD THE SOLUTION
Material, process and proof must work together.
Converting route
Lamination and liner conversion
Kiss-cut and easy-peel tabs
Assembly-ready part presentation
What to verify
Surface energy and cleanliness
Static / dynamic load
Temperature, humidity and dwell time
03 / HELPFUL PROJECT INFORMATION
Share what you know. Missing details can be confirmed later.
- Substrates / load / temperature
- Drawing, dimensions and critical tolerances, if available
- Current material, expected volume and target schedule
- Acceptance criteria and required validation
FREE SAMPLE · FAST RESPONSE
Tell us your requirement. Move the project forward.
Start with your contact details and the problem. Add a drawing when available; we respond with the next step and keep progress visible through delivery.
01Quotation response within 1 hour+
After receiving usable project information, our sales and engineering team confirms receipt and returns the quotation or the specific information still needed.
02Workshop / engineering response within 4 hours+
Drawing, material, process, tolerance and delivery questions are passed to the responsible workshop or engineer for a practical answer.
03Project follow-up starts within 1 working day+
Set up the review path, responsible contact, milestones and next actions so purchasing and engineering teams know the current status.
04Free samples in 1–3 days+
Samples are free. For feasible standard projects, samples can be prepared in 1–3 days after drawing and material confirmation.
05Visible production progress+
Support progress photos and milestone updates through material preparation, production, inspection, packing and shipment.
FREE SAMPLE · ONE-HOUR QUOTATION RESPONSE
Start with the problem. Add a drawing when available.
Only four fields are required to start. PDF, DXF, DWG, STEP and images are optional; every project can request samples.